A riso print rarely has more than three inks, so the choice of colours does most of the work. The good news: because riso inks are see-through, two inks give you three colours. Where they overlap, they mix.
Below are eight pairings that work, with the hex code of each ink and of the colour they make together. Click a print to open that combination in the lab.
1. Fluorescent Pink and Blue
The riso classic. Warm against cool, and the overlap is a deep violet that can stand in for black.
- Fluorescent Pink #ff48b0
- Blue #0078bf
- Overlap #002284
3. Fluorescent Pink and Yellow
Pure sunshine. The overlap is a warm red-orange, good for sunsets, fruit and anything cheerful.
- Fluorescent Pink #ff48b0
- Yellow #ffe800
- Overlap #ff4200
4. Fluorescent Orange and Teal
A softer take on orange and blue. The overlap is a dark, earthy green-brown that works for outlines.
- Fluorescent Orange #ff7477
- Teal #00838a
- Overlap #003c40
5. Bright Red and Federal Blue
Bold and a little retro, like an old poster. The navy keeps the red in check.
- Bright Red #f15060
- Federal Blue #3d5588
- Overlap #3a1b33
6. Sunflower and Medium Blue
Warm yellow and ink blue. Friendly, readable and strong enough for type.
- Sunflower #ffb511
- Medium Blue #3255a4
- Overlap #323c0b
7. Coral and Hunter Green
Muted and botanical. A good pick when the fluorescent inks feel too loud.
- Coral #ff8e91
- Hunter Green #407060
- Overlap #403e37
How to choose your own
- Pair a light ink with a dark one. Yellow, Mint, Aqua and Coral are light. Blue, Teal, Federal Blue and Black are dark. A light and a dark ink give the clearest overlap.
- Print the light ink in large areas. Use the dark ink for details and outlines on top. The other way round the light ink disappears.
- Count the overlap as a colour. If the mix of your two inks is muddy, the whole print will feel muddy. Check the overlap before you commit.
- Think about the paper. Ink on cream or kraft paper looks warmer and darker than on white. A pale ink such as Yellow can vanish on coloured paper.
- Add a third ink last. Start with two. Add a third only when you miss something, and keep it small.
Where the hex codes come from
Riso inks are spot colours, so a hex code is always an approximation. The codes on this page are the ones designers commonly use to prepare artwork for riso. The overlap colours are worked out by multiplying the two inks, the same way the lab draws them. In a real print the result depends on the paper, the order of the layers and how heavily the ink is laid down.
You will find every ink, with its hex, RGB and nearest Pantone, in the riso ink colour chart. Each ink has its own page with three more pairings.
Last updated on 21 November 2026, by Michelle of Riso Lab.